ISO Standards

ITDA and ISO (ISO is the ANSI Standards for the International/Global Market)

Standards for Training Organisations/System EN 14153-1

This Standard specifies the competencies that a scuba diver has to have achieved in order for a service provider to award the scuba diver certification indicating that he has met or exceeded scuba diver level 1 "Supervised Diver" and specifies assessment of these competencies.

Competencies of a recreational scuba diver at level 1 "Supervised Diver"

A scuba diver at level 1 "Supervised Diver" shall be trained to have sufficient knowledge, skill and experience to dive in open water under the direct supervision of a dive leader.

Scuba divers at level 1 "Supervised Diver" are qualified to dive within the following parameters accompanied by a dive leader:

Dive to a recommended maximum depth of 12 m under the direct supervision of a dive leader

Dive in groups of up to four level 1 scuba divers per dive leader provided the dive leader is capable of establishing physical contact with all level 1 scuba divers at any point during the dive

Make dives which do not require in-water decompression stops

Dive only when appropriate support is available at the surface

Dive under conditions that are equal or better than the conditions where they were trained

If accompanied by a scuba instructor, a scuba diver at level 1 may gain progressive experience beyond these parameters and develop competency in managing more challenging diving conditions designed to lead to higher qualifications.

ITDA Entry Level Diver & Experience Day Courses meet this standard as an upgrade program - EN 14153-1

EN 14153-2

This standard specifies the competencies that a scuba diver has to have achieved in order for a service provider to award the scuba diver certification indicating that he has met or exceeded scuba diver level 2 "Autonomous Diver" and assessment of these competencies.

Competencies of a recreational scuba diver at level 2 "Autonomous Diver"

A scuba diver at level 2 "Autonomous Diver" shall be trained to have sufficient knowledge, skill and experience to dive with other scuba divers of at least the same level in open water without supervision of a scuba instructor.

Scuba divers at level 2 "Autonomous Diver" are qualified to dive within the following parameters unless they have additional training or are accompanied by a dive leader:

Dive to a recommended maximum depth of 20 m with other scuba divers of the same level

Make dives, which do not require in-water decompression stops

Dive only when appropriate support is available at the surface

Dive under conditions that are equal or better than the conditions where they were trained

If diving conditions are significantly different from those previously experienced, a scuba diver at level 2 "Autonomous Diver" requires an appropriate orientation from a dive leader.

If accompanied by a scuba instructor, a scuba diver at level 2 "Autonomous Diver" may gain progressive experience beyond these parameters and develop competency in managing more challenging diving conditions (e.g. increased depth and current, reduced visibility, extreme temperatures) designed to lead to higher qualifications.

ITDA Open Water Diver & Dry Suit / Club Diver Courses meets this standard

EN 14153-2/ISO 24891-2

ITDA "Dive Leader both meets and exceeds this standard

This Standard specifies the competencies that a scuba diver has to have achieved in order for a service provider to award the scuba diver certification indicating that he has met or exceeded scuba diver level 3 "Dive Leader" and specifies assessment of these competencies.

Competencies of a recreational scuba diver at level 3 "Dive Leader"

Scuba divers at level 3 "Dive Leader" shall be trained to have sufficient knowledge, skill and experience to plan, organise and conduct their dives and lead other recreational scuba divers in open water.

We (ITDA) require as a minimum entry level for our dive leader certification program:

80-100 Dives, 10 of which may be training dives from the dive leader course program (80 Dives Experience Minimum Acceptable)

Be 18 Years old and have a mature attitude

Have at least 30 logged dives on Nitrox or to / below 30m/100ft.

Have 5 Specialist Certifications (Including: Deep Air / Navigation / Buoyancy /Equipment / Rescue )

Be certififed as Oxygen First Aid/CPR with IHMP or DAN as current or a refresher program included in the DL Training Program

Be Diving Fit and able to rescue two divers from depth and get them out of the water safety

Scuba divers at level 3 "Dive Leader" are qualified to:

Conduct any specialised recreational scuba diving activities for which they have received appropriate training and certification

Plan and execute emergency procedures appropriate for the diving environment and activities.

If diving and environmental conditions are significantly different from those previously experienced, a scuba diver at level 3 "Dive Leader" requires an appropriate orientation with regard to local environmental conditions.

In order to lead scuba divers on dives which have more demanding operational parameters a scuba diver at level 3 "Dive Leader" shall have appropriate specialised training and experience.  

The European Standard EN 14413/International Standard ISO 24802
consists of the following parts:

ITDA Open Water / Dry Suit and Club Instructor meet and exceed this standard

This Standard specifies the competencies that a scuba instructor ought to achieve in order for a training organization to award the scuba instructor certification indicating that he has met or exceeded scuba instructor level 1 and specifies assessment of these competencies.

Competencies of a scuba instructor at level 1

A level 1 scuba instructor shall be trained to be qualified to:

Teach and assess scuba students up to level 1 on their theoretical knowledge,

Teach and assess scuba students up to level 1 in confined water,

If supervised and authorised by a scuba instructor level 2:

Gain progressive experience in teaching and assessing the theoretical knowledge of scuba diver levels 2 to 3

Teach any level of scuba diver in confined water

Gain progressive experience in teaching and assessing open water surface skills

If supervised and directly observed by a scuba instructor level 2:

Gain progressive experience in teaching and evaluating in confined and open water.

ITDA Sports Instructor Program meets and exceeds this standard

This Standard specifies the competencies that a scuba instructor ought to achieve in order for a training organization to award the scuba instructor certification indicating that he has met or exceeded scuba instructor level 2 and specifies assessment of these competencies.

Competencies of a scuba instructor at level 2

A level 2 scuba instructor shall be trained to be qualified to:

Plan, organise and conduct dives and lead other recreational scuba divers of all levels in open water, including rescue activities

Teach and assess students up to scuba diver level 1, level 2 and level 3

Supervise level 1 scuba instructors

Plan, organise and conduct scuba diver training courses

With suitable additional training or experience to plan, organise and conduct appropriate specialty or diving operational activities

ITDA Nitrox / Ntech Nitrox and Advanced Nitrox meet and exceed this standard

This International Standard ISO 11107 specifies the level of competence required of a scuba diver in order to be awarded an enriched air nitrox (EAN) diver certification by a training organization.

The training programme specified in this International Standards shall ensure that scuba divers are qualified to

Plan, conduct and log EAN open-water, no-decompression dives, when accompanied by another scuba diver of at least level 2 "Autonomous Diver", in accordance with ISO 24801-2; Procure EAN mixes, EAN equipment and other services to engage in recreational EAN diving without supervision.

The training programme does not qualify divers to make dives which require mandatory in-water decompression stops or dives using more than one breathing gas and/or Rebreathers.

A Nitrox training programme in accordance with this standard may be conducted in conjunction with scuba diver training in accordance with ISO 24801-2, but the certification shall not be issued until such time as the student has finalized all certification requirements in accordance with ISO 24801-2.

All ITDA Entry Level and Experience Program exceed this standard

This International Standard specifies minimum program content requirements for introductory scuba experiences in recreational scuba diving and applies to programs that include participants being taken into an open water environment.

It does not apply to programs that are exclusively conducted in a confined water environment (e.g. swimming pools). Under no conditions are these requirements considered to be a standard for the training and certification of scuba divers.

Instead, these requirements are used to introduce a non-diver to recreational scuba diving by means of a supervised, controlled dive experience, and to encourage the participant to seek further training.

The introductory diving program does not result in certification, but is experiential in nature; consequently, in-depth knowledge of diving academics and skills is not necessary. Participants are taught only what is required of them to experience scuba diving under direct supervision.

Learn More: ITDA Standards - ANSI/EN Standards - Standards Updates - ITDA and UK HSE Standards - Standards Others...  Any inquires re standards please contact us: admin@diveitda.com

 

 

ITDA and IHMP, training scuba diving, advanced and technical, training professional divers, from diver to instructor, plus IHMP first-aid and IHMP instructor, plus, our unique divepro opportunity.